How To Install A Hayward Pool Skimmer
tropical pool water image by Pavel Losevsky from Fotolia.com
Installing or replacing a Hayward side wall skimmer is something that just about every pool owner tin can exercise. If you lot have assembled the above ground puddle yourself, well-nigh of the difficult work is already washed. Installing a Hayward side wall skimmer is easy compared to the piece of work of assembling a pool. Hayward makes information technology easy considering they sell skimmer kits that have but about everything you demand to install or supplant an erstwhile above-ground pool skimmer.
Reduce the h2o level to approximately 2 inches beneath the area where the skimmer is to exist installed.
Trace the outline of the skimmer on the outer wall using a permanent marker. The Hayward side wall skimmer kit comes with a traceable template. Place the template on the outer pool wall and trace the skimmer opening and the holes for the screws. Permanent marker makes it easier to encounter the lines.
- Installing or replacing a Hayward side wall skimmer is something that just about every pool possessor tin practise.
- Hayward makes it easy because they sell skimmer kits that have only about everything yous demand to install or supervene upon an old higher up-basis pool skimmer.
Cut out the large skimmer opening. Using your cutting tool, cutting the skimmer opening as traced. Make certain to cutting through the pool wall and the vinyl pool lining.
Drill the screw holes. Following the Hayward skimmer template, drill the traced holes for the screws.
Insert place belongings screws in the screw holes. If at that place is water in the pool, the weight of the water volition pull the lining downward. After drilling the holes, place screws in the holes to prevent the lining from moving. These temporary screws volition exist removed when you install the skimmer faceplate.
- Cut out the big skimmer opening.
- After drilling the holes, identify screws in the holes to preclude the lining from moving.
Adhere this Hayward skimmer to the outer pool wall using the screws provided. Identify the safe seal in between the pool wall and the skimmer. Line the skimmer up with the pre-drilled holes and insert the screws. The screws must be inserted from inside the pool. The screws will go through the lining and wall into the skimmer.
Install the faceplate on the within of the puddle. Place the rubber liner in between the Hayward faceplate and the pool lining. Visually align the spiral holes with the face plate. Remove the temporary holding screws and use them to affix the faceplate to the pool. The faceplate screws through faceplate, rubber seal and pool wall into the skimmer.
- Attach this Hayward skimmer to the outer pool wall using the screws provided.
- Remove the temporary property screws and utilize them to braze the faceplate to the pool.
Increase the h2o level until information technology reaches mid height of the skimmer faceplate.
After installing the skimmer, check the puddle wall around the skimmer for leaks. If yous discover leaks, tighten each of the screws.
Source: https://www.gardenguides.com/12382949-how-to-install-a-hayward-side-wall-skimmer-in-an-above-ground-pool.html
Posted by: wardnearst.blogspot.com
0 Response to "How To Install A Hayward Pool Skimmer"
Post a Comment